RGB Neon Flex 220V 240V 11x22mm IP65 Dimmable with Remote

RGB Neon Flex 11x22mm – Horizontal Bend, 220–240V, 14W/m – Indoor & Light Outdoor Use

Our 11x22mm RGB Neon Flex (Horizontal Bend) is a high-performance lighting solution designed for striking colour effects in both residential and commercial spaces. Powered by 220–240V and consuming just 14W per metre, it features a high-quality translucent silicone cover that ensures uniform, dot-free illumination, delivering a smoother visual finish compared to traditional LED strip lights.

This neon flex can be cut every 100cm (1 metre) at the clearly marked cut points. Only cut along the designated lines — cutting outside these marks will render the segment unusable.

Each strip comes with a 1-year warranty for indoor and outdoor applications when properly sealed and installed. The required RGB controller is not waterproof and must be housed in a dry, waterproof enclosure when used outdoors.

Rated IP65, this neon flex is suitable for indoor use and light outdoor environments where only mild water splashes or moisture may be present (e.g. covered patios or sheltered façades). It is not intended for extreme weather conditions or high-exposure areas. Do not use near swimming pools, saunas, bathrooms, or underwater. For outdoor use, ensure heatshrink tubing and silicone sealant are applied thoroughly at the end cap and front connection to prevent water ingress.

In the package:
1 x RGB Neon Flex
1 x RGB Controller with Remote
1 x Pack of Clips (1 clip per metre)

Important Installation Notice:

This product is not suitable for recessed outdoor installations on the ground or any surface exposed to direct water or heavy weather. For such applications, we recommend using an IP68-rated neon flex, which is specifically designed for outdoor recessed use and offers higher protection against water and environmental conditions.

Please note that any modification or improper use of this product will void the warranty. In particular, hardwiring this light is not supported and will invalidate the warranty. It must be connected using the provided plug. If you require a hardwired installation, please choose one of our DC voltage neon flex lights (12V or 24V or 48V), which are designed for that purpose.

If you have any questions or need help selecting the right product for your project, feel free to contact our team at support@glowleds.co.uk — we’re here to help.

Specifications

• Voltage: 220V 240V AC
• Typ. Power: 14W/m
• LEDs per metre: 72 LEDs
• Cut Points: 1 metre (100cm)
• CRI: >80
• Beam Angle: 120°
• Dimensions: 11mm x 22mm
• Lumens per metre: Up to 750lm
• Warranty: 1 Years
• IP Rating: IP65 (suitable for indoor and limited outdoor use)
• Dimming: Yes